- 4-Jaw Self-Centeringlathe chuck.
- 2″ (50 mm) diameter
- Includes chuck key, inside and outside jaws
- M14x1 threaded mounting
This 2 inch 4-Jaw self centering lathe chuck fits SIEG C0, Unimat 3 and Unimat 4 lathes. Itincludes tommy bars, inside and outside jaws, and mounting bolts.
This chuck has a M14x1 threaded through hole (approximately 13mm clearance). It holds work up to 1.89″ (48 mm) in diameter.
This chuck requires a 15 mm OD x 14 mm ID bushing to mount on a Unimat 3 or 4.
| Rated Capacity, Inside Jaws | 0.08″ – 0.79″ (2.0 mm – 20.0 mm) |
| Rated Capacity, Inside Jaws Jamming Range | 0.87″ – 1.97″ (22.0 mm – 50.0 mm) |
| Rated Capacity, Outside Jaws | 0.79″ – 1.89″ (20.0 mm – 48.0 mm) |
| Diameter, Overall | 1.97″ (50.0 mm) |
| Registration Recess Diameter | 0.91″ (23.0 mm) |
| Center Hole Diameter | 0.5″ (13 mm) |
| Height | 0.9″ (23 mm) |
| Jaw Height Above Face | 0.5″ (12 mm) |
| Height with Jaws | 1.38″ (35.0 mm) |
