The EL-AV CND Series cyclone water separator removesup to 99% of bulk liquid water from compressed air using ahigh-velocity centrifugal vane — no element to replace, no consumablesto stock. Mount it as the first stage of any plant air-treatment trainto protect refrigerated dryers, coalescing filters, and downstream toolingfrom slugs of water.
- Centrifugal cyclone vane — element-free, zero replacement cost
- Anodized cast aluminum housing rated to 16 bar / 232 PSI
- Float-actuated auto drainer included
CND200 — Detailed Specifications
| Rated Capacity | 706 CFM / 20,000 l/min |
| Connection (NPT) | 2″ |
| Max Working Pressure | 16 bar / 232 PSI |
| Min Working Pressure | 2 bar / 29 PSI |
| Max Working Temp | 80°C / 176°F |
| Min Working Temp | 2°C / 36°F |
| Body | Anodized cast aluminum |
| Element | None — centrifugal cyclone vane (zero consumables) |
| Removal Efficiency | ~99% of liquid water at rated flow |
| Drainer | Float-actuated auto drainer included |
Placement
Install the CND immediately downstream of the air receiver tank,ahead of any refrigerated dryer or coalescing filter. The cyclone needsturbulent flow to work properly — don’t install it directly off thecompressor discharge (no separation will occur). For high-condensateenvironments, replace the standard drainer with theEL-AV CNDSSAD stainless-steel auto drainer upgrade.
![PROFRAME HELMET MATTE [BLK] L](https://www.bestfixhardwareus.com/wp-content/uploads/2026/09/proframe-helmet-matte-blk-l.webp)