Acuspread™ is a 100% Concentrated non-ionic Surfactant to improve the activity of most Pesticides. Improves Spray Spreading, Wetting and Uptake. Acts as a Soil Wetting Agent to improve Water Infiltration and Reduce Dry Patch.
Active Ingredient:
Polyalkylene Oxide Derivative (100 g/L Active Silicone Emulsion).
Purpose:(Registered Uses)
Spray Adjuvant it improves the Performance of Selected Agricultural and Horticultural Sprays by:
– Increasing Spray Spreading.
– Improving Coverage.
– Enhancing Uptake.
– Reducing Spray Droplet Surface Tension.
– Soil Wetting Agent.
Suitable For:
– Turf.
– Lawns.
– Cotula Greens.
Benefits Include:
– Improved Water Penetration.
– Better Soil Moisture Distribution.
– Improved Drainage.
– Assists in Controlling Dry Patch.
Hazard Information:
– Human Health.
– May be harmful if Swallowed, Inhaled or Absorbed through the Skin.
– May cause Eye Irritation.
– May cause Organ Damage following prolonged, repeated exposure at high doses.
Environmental:
– Toxic to Aquatic Organisms with long-lasting effects.
– Avoid Contamination of Waterways.
Note: Although the label states “Not Classified” under HSNO Hazard Classification, it still includes Precautionary Statements for Health and Environmental Protection.
Personal Protective Equipment: (PPE).
When Handling or Mixing Wear:
– Impervious Gloves.
– Overalls.
– Boots.
– Goggles or Face Shield.
Avoid:
– Skin Contact.
– Eye Contact.
– Inhalation of Spray Mist.
– Wash Hands and Face thoroughly after use.
Mixing Instructions:
– Add Acuspread when the Spray Tank is approximately 7/8 full.
– This helps minimise Foaming.
Application Rates:
Spray Adjuvant:
Spray Type Broadacre & Aerial:
Aerial:
– Rate (<100 L/ha) use 100–150 mL/ha.
Broadacre:
-Rate (100–500 L/ha) use 50–100 mL/100 L spray.
Broadacre:
-Rate (>500 L/ha) use 25–50 mL/100 L spray.
Spray Type Handgun:
– Rate 50–100 mL/100 L.
Spray Type Knapsack:
– Rate 5–10 mL per 15 L.
Soil Wetting Agent:
Initial Treatment:
Application:
– Rate 10 L/ha (1 mL/m²).
Maintenance:
– Rate 5 L/ha (0.5 mL/m²).
Recommendations:
– Apply with Calibrated Boom or Knapsack Sprayer.
– Avoid Hot, Sunny Conditions.
– Light Rain or Irrigation within 3 days Improves Performance.
– DO NOT Tank Mix with other Products when using as a Soil Wetting Agent.
Water Conditioning:
The label includes Guidance for adjusting Spray Water pH according to Water Hardness.
Typical Rates Range From:
– 40–50 mL/100 L (Soft Water) Up to 220+ mL/100 L (very Hard Water).
– This assists in Reducing Spray Water pH where required.
Storage:
– Store in the Original Tightly Closed Container.
– Keep in a Cool, Dry Location.
– Store away from Foodstuffs.
Storage Over 1,000 Litres Requires:
– Secondary Containment.
– Signage.
– Emergency Response Plan.
Equipment:
– Use well-maintained, Accurately Calibrated Spray Equipment.
Disposal:
– Triple Rinse Containers.
– Add rinsate to the Spray Tank.
– Recycle Containers where Possible.
– Otherwise Crush and Bury in an Approved Landfill.
– Dispose of unused Product according to the Label.
Spill Response:
– Exclude Unnecessary People.
– Prevent Contamination of Waterways.
– Absorb with Inert Material.
– Dispose of Waste Safely.
First Aid:
If Swallowed:
– DO NOT induce Vomiting.
– Contact the National Poisons Centre (0800 764 766) or a Doctor Immediately.
Skin or Eye Contact:
– Remove Contaminated Clothing.
– Flush affected Area thoroughly with running Water.
Transport:
– Do not Transport on Passenger Service Vehicles.
Caution:
Must be used strictly according to label directions.
Available in a 5L, 10L, 20L.
Acuspread Label 10L
Please Contact us for a Safety Data Sheet on this Product.
